HOLLOW METAL DOORS
Manufactured with rust resistant galvaneal steel, doors are available in 20 gauge, 18 gauge and 16 gauge.
All Baron doors are constructed to meet the most rigid architectural demands.
All Baron 20' & 18' doors are approved for Dade County.
| Type "B" (Honeycomb) |
DESIGNED FOR INTERIOR
AND STANDARD DUTY UTILIZATION Made with high density honeycomb core, laminated under pressure along with interlocking lockseam edges which ensure durability. |
 |
| TYPE "R" (Insulated) |
DESIGNED FOR EXTERIOR
USE WITH HIGH THERMAL QUALITIES Assembled with solid slabs of polystyrene or polyurethane bonded permanently to the inside of the skin providing a R6 or R12 thermal factor and sound deadening qualities. This type offers security and flexibility in the most adverse conditions. |
 |
| Type "S" (Steel Stiffened) |
EXTRA HEAVY DUTY DOOR
RECOMMENDED FOR VERY HIGH FREQUENCY UTILIZATION Constructed with heavy gauge vertical steel stiffeners at 6" on center complete with polystyrene or fiberglass. |
 |
| TYPE "SW" (Steel Stiffened Weldedseam) |
DESIGNED FOR HIGH
SECURITY FOR USE IN EXTREME CONDITIONS Manufactured with interlocking steel stiffeners, spot welded on both faces at 6" o.c. Edge seams are continuously welded for maximum strength and ground smooth. All voids filled with fiberglass insulation. |
 |
STANDARD BARON DOOR ELEVATIONS
SPECIFICATIONS
- All doors are manufactured with integral closer reinforcing box and end channels (standard for all doors)
- All doors are prepared for 1½ pairs of standard weight 4½" hinges (High frequency hinge reinforcement standard)
- All doors offer a standard preparation for cylindrical (161) 2¾" back-set or rim panic reinforcement (push/pull)
- All doors are made with mechanically interlocking seams
- All doors are available with optional steel or vinyl top caps for exterior applications