Baron’s breakformed drywall frames are offered in knockdown form or welded and can be engineered to meet specific architectural requirements for a wide range of uses.
Specifications:
- 18 gauge (1.2) or 16 gauge (1.5) galvanneal steel
- For use with 1 ¾" (45) doors (steel or wood)
- Available jamb sizes from 4 ½" up to 12 3/4"
- Prepared for 9/32" silencer holes
- All jambs complete with base and center strap anchors and an adjustable top tension anchor

20 Gauge for 1-3/8" Door
Baron’s knockdown residential frames are designed with overlapping mitred corners for a clean and accurate finish. The rabbet width and height are oversized to accept standard size 1 3/8" hollow core wood doors with minimal machining requirement.
Specifications:
- 20 gauge (.76) galvanneal steel
- For use with 1 3/8" (38) doors
- Available in wall sizes: 2 5/8" 3 ½", 4 5/8" and 4 7/8"
- Prepared for 3/16 silencer holes (silencers included)
- All jambs complete with base and center strap anchors and an adjustable top tension anchor
All frames prepared and supplied with one pair of 3½" x 3 ½" hinges C4 finish
All strike jambs prepared for colonial or standard slab door

EXPANDABLE DRYWALL FRAMES
Baron’s expandable drywall frames offer optimum versatility due to its unique design with over 3 inches of expansion to accommodate various wall thicknesses. Frames are available knockdown for easy field installation after walls have been erected.
Specifications:
- 18 gauge (1.2) or 16 gauge (1.5) galvanneal steel
- For use with 1 ¾" (45) doors (steel or wood)
- Adjustable from 5 ½" to 8 ¾"
- Prepared for 9/32" silencer holes
- Prepared to receive countersunk screws #7 x 2 ½ (included)
- Prepared with 12 gauge A.S.A. strike reinforcing
- Prepared with 1 ½ pairs of high frequency 10 gauge 4 ½" hinge reinforcement
- Height available: 6’8", 7’0" or 8'0"
